Design of a Novel Fab-Like Antibody Fragment with Enhanced Stability and Affinity for Clinical use.

With increasing interest in applying recombinant monoclonal antibodies (mAbs) in human medicine, engineered mAb fragments with reduced size and improved stability are in demand to overcome current limitations in clinical use. Herein, a novel Fab-like antibody fragment generated via an in silico-based engineering approach where the CH1 and CL domains of Fab are replaced by the IgG1 CH3 domains is described. This construct, designated as FabCH3, maintains the natural N-terminus and C-terminus of IgG antibody, can be expressed at a high level in bacterial cells and, importantly, exhibits much higher stability and affinity than the parental Fab when tested in a mesothelin-specific Fab m912, as well as a vascular endothelial growth factor A (VEGFA)-specific Fab Ranibizumab (in vivo). The high-resolution crystal structures of m912 FabCH3 and m912 Fab are determined, and the comparative analysis reveals more rigid structures in both constant domains and complementarity-determining regions of FabCH3, explaining its enhanced stability and affinity. Overall, the stabilized FabCH3 described in this report provides a versatile platform for engineering Fab-like antibody fragments with higher stability and antigen-binding affinity that can be used as a distinct class of antibody therapeutics.

Determining vitreous viscosity using fluorescence recovery after photobleaching.

PURPOSE: Vitreous humor is a complex biofluid whose composition determines its structure and function. Vitreous viscosity will affect the delivery, distribution, and half-life of intraocular drugs, and key physiological molecules. The central pig vitreous is thought to closely match human vitreous viscosity. Diffusion is inversely related to viscosity, and diffusion is of fundamental importance for all biochemical reactions. Fluorescence Recovery After Photobleaching (FRAP) may provide a novel means of measuring intravitreal diffusion that could be applied to drugs and physiological macromolecules. It would also provide information about vitreous viscosity, which is relevant to drug elimination, and delivery. METHODS: Vitreous viscosity and intravitreal macromolecular diffusion of fluorescently labelled macromolecules were investigated in porcine eyes using fluorescence recovery after photobleaching (FRAP). Fluorescein isothiocyanate conjugated (FITC) dextrans and ficolls of varying molecular weights (MWs), and FITC-bovine serum albumin (BSA) were employed using FRAP bleach areas of different diameters. RESULTS: The mean (±standard deviation) viscosity of porcine vitreous using dextran, ficoll and BSA were 3.54 ± 1.40, 2.86 ± 1.13 and 4.54 ± 0.13 cP respectively, with an average of 3.65 ± 0.60 cP. CONCLUSIONS: FRAP is a feasible and practical optical method to quantify the diffusion of macromolecules through vitreous.

Targeted drug delivery vehicles mediated by nanocarriers and aptamers for posterior eye disease therapeutics: barriers, recent advances and potential opportunities.

Nanomedicine and aptamer have excellent potential in giving play to passive and active targeting respectively, which are considered to be effective strategies in the retro-ocular drug delivery system. The presence of closely adjoined tissue structures in the eye makes it difficult to administer the drug in the posterior segment of the eye. The application of nanomedicine could represent a new avenue for the treatment, since it could improve penetration, achieve targeted release, and improve bioavailability. Additionally, a novel type of targeted molecule aptamer with identical objective was proposed. As an emerging molecule, aptamer shows the advantages of penetration, non-toxicity, and high biocompatibility, which make it suitable for ocular drug administration. The purpose of this paper is to summarize the recent studies on the effectiveness of nanoparticles as a drug delivery to the posterior segment of the eye. This paper also creatively looks forward to the possibility of the combined application of nanocarriers and aptamers as a new method of targeted drug delivery system in the field of post-ophthalmic therapy.

Ocular Pharmacokinetics of Intravitreally Injected Protein Therapeutics: Comparison among Standard-of-Care Formats.

The current standard of care for antivascular endothelial growth factor (VEGF) treatment requires frequent intravitreal (IVT) injections of protein therapeutics, as a result of limited retention within the eye. A thorough understanding of the determinants of ocular pharmacokinetics (PK) and its translation across species is an essential prerequisite for developing more durable treatments. In this work, we studied the ocular PK in macaques of the protein formats that comprise today's anti-VEGF standard of care. Cynomolgus monkeys received a single IVT injection of a single-chain variable fragment (scFv, brolucizumab), antigen-binding fragment (Fab, ranibizumab), fragment crystallizable-fusion protein (Fc-fusion, aflibercept), or immunoglobulin G monoclonal antibody (IgG, VA2 CrossMAb). Drug concentrations were determined in aqueous humor samples collected up to 42 days postinjection using immunoassay methods. The ocular half-life (t1/2) was 2.28, 2.62, 3.13, and 3.26 days for scFv, Fab, Fc-fusion, and IgG, respectively. A correlation with human t1/2 values from the literature confirmed the translational significance of the cynomolgus monkey as an animal model for ocular research. The relation between ocular t1/2 and molecular size was also investigated. Size was inferred from the molecular weight (MW) or determined experimentally by dynamic light scattering. The MW and hydrodynamic radius were found to be good predictors for the ocular t1/2 of globular proteins. The analysis showed that molecular size is a determinant of ocular disposition and may be used in lieu of dedicated PK studies in animals.

Biosimilars for Retinal Diseases: An Update.

PURPOSE: To review the biosimilars of anti-vascular endothelial growth factor agents for retinal diseases and provide an update about their development. DESIGN: Literature review. METHODS: A comprehensive literature review was performed for scientific articles, clinical trials, and press releases for the development of biosimilars in ophthalmology. RESULTS: To date, Razumab (Intas Pharmaceuticals Ltd, Ahmedabad, GJ, India) is the only approved biosimilar for ophthalmic use, but the landscape will rapidly change in the future with multiple biosimilar candidates, which are currently in phase 3 trials, showing promising early results. CONCLUSION: Biosimilars hold the potential to reduce the financial burden of the highly efficacious biologic therapy in retinal pathologies. However, the off-label bevacizumab may differentiate the success of biosimilars in different geographic regions.

Enhancing chimeric hydrophobin II-vascular endothelial growth factor A165 expression in Pichia pastoris and its efficient purification using hydrophobin counterpart.

We report cloning and expressing of recombinant human VEGF-A165, fused at the N-terminal with Hydrophobin II (HFBII) from Trichoderma reseei, in yeast Pichia pastoris. We validated the construct using SDS-PAGE and ELISA against VEGF-A165 and efficiently performed protein purification and enrichment based on HFBII counterpart and using an aqueous two-phase system (ATPS) with nonionic surfactant X-114. We studied the effects of various culture medium additives and interaction effects of positive factors to increase the recombinant HFBII-VEGF-A165 production. Supplementing the Pichia pastoris cell culture medium with Mg2+, Polysorbate 20 (PS 20), and 4-phenylbutyrate (PBA) improved the expression of the chimeric protein. Orthogonal experiments showed that the optimal condition to achieve maximal HFBII-VEGF-A165 production was with the addition of PBA, PS 20, and MgSO4. Under this condition, the production of the target protein was 4.5 times more than that in the medium without the additives. Overall, our approach to produce chimeric HFBII-VEGF-A165 and selectively capture it in ATPS is promising for large-scale protein production without laborious downstream processing.

Transscleral sustained ranibizumab delivery using an episcleral implantable device: Suppression of laser-induced choroidal neovascularization in rats.

Successful treatment of age-related macular diseases requires an effective controlled drug release system with less invasive route of administration in the eye to reduce the burden of frequent intravitreal injections for patients. In this study, we developed an episcleral implantable device for sustained release of ranibizumab, and evaluated its efficacy on suppression of laser-induced choroidal neovascularization (CNV) in rats. We tested both biodegradable and non-biodegradable sheet-type devices consisting of crosslinked gelatin/chitosan (Gel/CS) and photopolymerized poly(ethyleneglycol) dimethacrylate that incorporated collagen microparticles (PEGDM/COL). In vitro release studies of FITC-labeled albumin showed a constant release from PEGDM/COL sheets compared to Gel/CS sheets. The Gel/CS sheets gradually biodegraded in the sclera during the 24-week implantation; however, the PEGDM/COL sheets did not degrade. FITC-albumin was detected in the retina during 18 weeks implantation in the PEGDM/COL sheet-treated group, and was detected in the Gel/CS sheet-treated group during 6 weeks implantation. CNV was suppressed 18 weeks after application of ranibizumab-loaded PEGDM/COL sheets compared to a placebo PEGDM/COL sheet-treated group, and to the intravitreal ranibizumab-injected group. In conclusion, the PEGDM/COL sheet device suppressed CNV via a transscleral administration route for 18 weeks, indicating that prolonged sustained ranibizumab release could reduce the burden of repeated intravitreal injections.

AppA: a web server for analysis, comparison, and visualization of contact residues and interfacial waters of antibody-antigen structures and models.

The study of contact residues and interfacial waters of antibody-antigen (Ab-Ag) structures could help in understanding the principles of antibody-antigen interactions as well as provide guidance for designing antibodies with improved affinities. Given the rapid pace with which new antibody-antigen structures are deposited in the protein databank (PDB), it is crucial to have computational tools to analyze contact residues and interfacial waters, and investigate them at different levels. In this study, we have developed AppA, a web server that can be used to analyze and compare 3D structures of contact residues and interfacial waters of antibody-antigen complexes. To the best of our knowledge, this is the first web server for antibody-antigen structures equipped with the capability for dissecting the contributions of interfacial water molecules, hydrogen bonds, hydrophobic interactions, van der Waals interactions and ionic interactions at the antibody-antigen interface, and for comparing the structures and conformations of contact residues. Various examples showcase the utility of AppA for such analyses and comparisons that could help in the understanding of antibody-antigen interactions and suggest mutations of contact residues to improve affinities of antibodies. The AppA web server is freely accessible at http://mspc.bii.a-star.edu.sg/minhn/appa.html.

Topical Drug Delivery to the Posterior Segment of the Eye: Addressing the Challenge of Preclinical to Clinical Translation.

Topical delivery of therapeutics to the posterior segment of the eye remains the "holy grail" of ocular drug delivery. As an example, anti-vascular endothelial growth factor biologics, such as ranibizumab, aflibercept, and bevacizumab, are delivered by intravitreal injection to treat neovascular age-related macular degeneration and, although these drugs have revolutionized treatment of the disease, less invasive alternatives to intravitreal injection are desired. Multiple reports in the literature have demonstrated topical delivery of both small and large molecules to the back of the eye in small animal models. Despite this progress, successful translation to larger species, and ultimately humans, has yet to be demonstrated. Selection of animal models with relevant ocular anatomy and physiology, along with appropriate experimental design, is critical to enable more relevant feasibility assessments and increased probability of successful translation.

One-step solid-oil-water emulsion for sustained bioactive ranibizumab release.

BACKGROUND: The advent of therapeutic proteins highlights the need for delivery systems that protect and extend the duration of its action. Ranibizumab-VEGF is one such drug used for treating wet AMD. This paper describes a facile method to sustain bioactive ranibizumab release from PLGA-based particles. METHODS: Two emulsion techniques were explored namely: water-in-oil-in-water (WOW) and solid-in-oil-in-water (SOW) emulsion. The bioactivity of ranibizumab was evaluated by comparing its binding capability to VEGF, measured with ELISA to total protein measured by microBCA. RESULTS: During the emulsion process, contact of ranibizumab with the water-oil interface is the main destabilizing factor and this can be prevented with the use of amphiphilic PVA and solid-state protein in WOW and SOW emulsion respectively. In vitro release of the ranibizumab-loaded particles indicated that a 15-day release could be achieved with SOW particles while the WOW particles generally suffered from a burst release. Released ranibizumab was capable of inhibiting endothelial cell growth indicating its retention of bioactivity. The suppression of burst release from the SOW particles was attributed to the relatively smooth surface morphology of the SOW microparticles. CONCLUSIONS: The use of SOW encapsulation in modulating ranibizumab release while maintaining their bioactivity has been highlighted.

Development of facile drug delivery platform of ranibizumab fabricated PLGA-PEGylated magnetic nanoparticles for age-related macular degeneration therapy.

The present anti-angiogenic therapies for neovascular age-related macular degeneration require effective drug delivery systems for transfer drug molecules. Ranibizumab is an active humanized monoclonal antibody that counteracts active forms of vascular endothelial growth factor A in the neovascular age-related macular degeneration therapy. The development of ranibizumab-related therapies, we have designed the effective drug career with engineered magnetic nanoparticles (Fe3O4) as a facile platform of ranibizumab delivery for the treatment of neovascular age-related macular degeneration. Ranibizumab conjugated iron oxide (Fe3O4)/PEGylated poly lactide-co-glycolide (PEG-PLGA) was successfully designed and the synthesized materials are analyzed different analytical techniques. The microscopic techniques (Scanning Electron Microscopy (SEM) & Transmission Electron Microscopy (TEM)) are clearly displayed that spherical nanoparticles into the PEG-PLGA matrix and presence of elements and chemical interactions confirmed by the results of energy dispersive X-ray analysis (EDX) and Fourier trans-form infrared (FTIR) spectroscopic methods. The in vitro anti-angiogenic evaluation of Fe3O4/PEG-PLGA polymer nanomaterial efficiently inhibits the tube formation in the Matrigel-based assay method by using human umbilical vein endothelial cells. Ranibizumab treated Fe3O4/PEG-PLGA polymer nanomaterials not disturbed cell proliferation and the results could not display the any significant differences in human endothelial cells. The present investigated results describe that Fe3O4/PEG-PLGA polymer nanomaterials can be highly favorable and novel formulation for the treatment of neovascular age-related macular degeneration.

Formulation Stabilization and Disaggregation of Bevacizumab, Ranibizumab and Aflibercept in Dilute Solutions.

PURPOSE: Studies were conducted to investigate dilute solutions of the monoclonal antibody (mAb) bevacizumab, mAb fragment ranibizumab and fusion protein aflibercept, develop common procedures for formulation of low concentration mAbs and identify a stabilizing formulation for anti-VEGF mAbs for use in in vitro permeation studies. METHODS: Excipient substitutions were screened. The most stabilizing formulation was chosen. Standard dilutions of bevacizumab, ranibizumab and aflibercept were prepared in PBS, manufacturer's formulation, and the new formulation. Analysis was by SE-HPLC and ELISA. Stability, disaggregation and pre-exposure tests were studied. RESULTS: When Avastin, Lucentis and Eylea are diluted in PBS or manufacturer's formulation, there is a 40-50% loss of monomer concentration and drug activity. A formulation containing 0.3% NaCl, 7.5% trehalose, 10 mM arginine and 0.04% Tween 80 at a pH of 6.78 stabilized the mAbs and minimized the drug loss. The formulation also disaggregates mAb aggregation while preserving the activity. Degassing the formulation increases recovery. CONCLUSIONS: We developed a novel formulation that significantly stabilizes mAbs under unfavorable conditions such as low concentration or body temperature. The formulation allows for tissue permeation experimentation. The formulation also exhibits a disaggregating effect on mAbs, which can be applied to the manufacture/packaging of mAbs and bioassay reagents.

Characterization of liposomal carriers for the trans-scleral transport of Ranibizumab.

Age-related macular degeneration (AMD) is a leading cause of blindness in the modern world. The standard treatment regimen for neovascular AMD is the monthly/bimonthly intravitreal injection of anti-VEGF agents such as ranibizumab or aflibercept. However, these repeated invasive injections can lead to sight-threatening complications. Sustained delivery by encapsulation of the drug in carriers is a way to reduce the frequency of these injections. Liposomes are biocompatible, non-toxic vesicular nanocarriers, which can be used to encapsulate therapeutic agents to provide sustained release. The protein encapsulation was performed by a modified dehydration-rehydration (DRV) method. The liposomes formed were characterized for size, zeta potential, encapsulation efficiency, stability, in vitro release, and ex vivo release profiles. In addition, the localization of the liposomes themselves was studied ex vivo. Entrapment-efficiency of ranibizumab into 100-nm liposomes varied from 14.7 to 57.0%. Negatively-charged liposomes prepared from DPPC-DPPG were found to have the slowest release with a low initial burst release compared to the rest of liposomal formulations. The ex vivo protein release was found to slower than the in vitro protein release for all samples. In conclusion, the DPPC-DPPG liposomes significantly improved the encapsulation and release profile of ranibizumab.

Identification of multiple serine to asparagine sequence variation sites in an intended copy product of LUCENTIS® by mass spectrometry.

Patent expiration of first-generation biologics and the high cost of innovative biologics are 2 drivers for the development of biosimilar products. There are, however, technical challenges to the production of exact copies of such large molecules. In this study, we performed a head-to-head comparison between the originator anti-VEGF-A Fab product LUCENTIS® (ranibizumab) and an intended copy product using an integrated analytical approach. While no differences could be observed using size-exclusion chromatography, capillary electrophoresis-sodium dodecyl sulfate and potency assays, different acidic peaks were identified with cation ion exchange chromatography and capillary zone electrophoresis. Further investigation of the intact Fab, subunits and primary sequence with mass spectrometry demonstrated the presence of a modified light chain variant in the intended copy product batches. This variant was characterized with a mass increase of 27.01 Da compared to the originator sequence and its abundance was estimated in the range of 6-9% of the intended copy product light chain. MS/MS spectra interrogation confirmed that this modification relates to a serine to asparagine sequence variant found in the intended copy product light chain. We demonstrated that the integration of high-resolution and sensitive orthogonal technologies was beneficial to assess the similarity of an originator and an intended copy product.

Modulating release of ranibizumab and aflibercept from thiolated chitosan-based hydrogels for potential treatment of ocular neovascularization.

BACKGROUND: This paper describes the synthesis of thiolated chitosan-based hydrogels with varying degrees of crosslinking that has been utilized to modulate release kinetics of two clinically relevant FDA-approved anti-VEGF protein drugs, ranibizumab and aflibercept. These hydrogels have been fabricated into disc shaped structures for potential use as patches on ocular surface. METHODS: Protein conformational changes and aggregation after loading and release was evaluated by circular dichroism (CD), steady-state tryptophan fluorescence spectroscopy, electrophoresis and size-exclusion chromatography (SEC). Finally, the capacity of both released proteins to bind to VEGF was tested by ELISA and surface plasmon resonance (SPR) technology. RESULTS: The study demonstrates the versatility of thiolated chitosan-based hydrogels for delivering proteins. The effect of various parameters of the hydrogel on protein release kinetics and mechanism of protein release was studied using the Korsmeyer-Peppas release model. Furthermore, we have studied the stability of released proteins in detail while comparing it with non-entrapped proteins under physiological conditions to understand the effect of formulation conditions on protein stability. CONCLUSIONS: The disc-shaped thiolated chitosan-based hydrogels provide a potentially useful platform to deliver ranibizumab and aflibercept for the treatments of ocular diseases such as wet AMD, DME and corneal neovascularization.

Long-term in vitro functional stability of compounded ranibizumab and aflibercept.

OBJECTIVE: To determine the long-term in vitro functional stability of compounded ranibizumab and aflibercept. DESIGN: Laboratory study. METHODS: Ranibizumab and aflibercept were compounded into plastic syringes and stored under refrigerated conditions for up to 4 weeks. Half maximal inhibitory concentrations (IC50) from dose-response curves generated by using drugs and their respective targets in enzyme-linked immunosorbent assays were calculated. The functional activity of the drugs stored under these conditions was then compared with that of drug from a fresh glass vial obtained from the manufacturer. RESULTS: There was no statistically significant change in IC50 between ranibizumab stored in plastic syringes for 4 weeks compared with drug obtained from a fresh glass vial (p = 0.4883). Similarly, there was no statistically significant change in IC50 between aflibercept stored in plastic syringes for 4 weeks compared with drug obtained from a fresh glass vial (p = 0.6202). CONCLUSION: Compounding of ranibizumab and aflibercept in plastic syringes with storage for up to 4 weeks does not appear to have a detrimental effect on the in vitro functional activity of these medications. Because the cost of these medications can be prohibitive, compounding may be considered as a method of reducing cost.

Long-term release and stability of pharmaceutical proteins delivered from solid lipid implants.

Solid lipid implants (SLIs) prepared by twin-screw (tsc) extrusion represent a promising technology platform for the sustained release of pharmaceutical proteins. In this work, we report on two aspects, long-term release and stability of released protein. First, SLIs were produced by tsc-extrusion containing the low melting triglyceride H12 and the high melting triglyceride Dynasan D118. Two different proteins available in a freeze-dried matrix containing hydroxypropyl-ß-cyclodextrine (HP-ß-CD) were incorporated into the lipid matrix: a monoclonal antibody (mAb) from the IgG1 class and the fab-fragment Ranibizumab (Lucentis®). SLIs, composed of 10% protein lyophilizate and both triglycerides, were extruded at 35°C and 40rpm. Sustained release of both proteins was observed in a sustained manner for approximately 120days. Protein load per implant was increased by three different approaches resulting in a protein load of 3.00mg per implant without affecting the release profiles. The incubation medium containing the released protein was collected, concentrated and analyzed including liquid chromatography (SE-HPLC, IEX, HIC), electrophoresis (SDS-PAGE, on-chip gel electrophoresis) and FT-IR spectroscopy. The mAb showed a monomer loss of up to 7% (SE-HPLC) and IEX analysis revealed the formation of 16% acidic subspecies after 18weeks. FT-IR spectra of mAb indicated the formation of random coil structures towards the end of the release study. Ranibizumab was mainly released in its monomeric form (>95%), and approximately 5% hydrophobic subspecies were formed after 18weeks of release. FT-IR analysis revealed no changes in secondary structure. The release and stability profiles of both proteins underline the potential of SLIs as a delivery system. SLIs provide a promising platform for applications where really long-term release is needed, for example for intraocular delivery of anti-vascular endothelial growth factor (VEGF) drugs for age related macular degeneration (AMD).

Long-acting protein drugs for the treatment of ocular diseases.

Protein drugs that neutralize vascular endothelial growth factor (VEGF), such as aflibercept or ranibizumab, rescue vision in patients with retinal vascular diseases. Nonetheless, optimal visual outcomes require intraocular injections as frequently as every month. Here we report a method to extend the intravitreal half-life of protein drugs as an alternative to either encapsulation or chemical modifications with polymers. We combine a 97-amino-acid peptide of human origin that binds hyaluronan, a major macromolecular component of the eye's vitreous, with therapeutic antibodies and proteins. When administered to rabbit and monkey eyes, the half-life of the modified proteins is increased ∼3-4-fold relative to unmodified proteins. We further show that prototype long-acting anti-VEGF drugs (LAVAs) that include this peptide attenuate VEGF-induced retinal changes in animal models of neovascular retinal disease ∼3-4-fold longer than unmodified drugs. This approach has the potential to reduce the dosing frequency associated with retinal disease treatments.

Study of stability and biophysical characterization of ranibizumab and aflibercept.

The anti-vascular endothelial growth factor (VEGF) agents such as ranibizumab (Lucentis®) and aflibercept (EyLea®) are currently used as monthly or bimonthly intravitreal injections to treat potentially retinal diseases such as wet age-related macular degeneration (AMD) or diabetic macular edema (DME). Because of the complications associated with repeated intra-vitreal injections, there is considerable interest in developing a sustained delivery system. The purpose of this study was to examine the stability of both therapeutic proteins under physiological conditions as well as when incorporated into drug delivery systems (DDS). First, thermotropic properties in physiological conditions and at different pH values were evaluated by differential scanning calorimetry (DSC) to determine the protein denaturation temperature. Second, the effects of pH and incubation time on conformational changes and aggregation were evaluated by circular dichroism (CD), steady-state tryptophan fluorescence spectroscopy, and size-exclusion chromatography (SEC). Also, the ability of both proteins to bind to VEGF was tested in the aforementioned experimental conditions for up to 30 days. Finally, we investigated the stability of both proteins after a rapid screening method that simulates the first homogenizing step during the protein microencapsulation process. This method allowed the development of stable ranibizumab and aflibercept formulations that may be useful to entrap these proteins into microparticles selecting the most convenient organic solvent and protein stabilizers.

Quantification of the vascular endothelial growth factor with a bioluminescence resonance energy transfer (BRET) based single molecule biosensor.

Neovascular pathologies in the eye like age-related macular degeneration (AMD), the diabetic retinopathie (DR), retinopathie of prematurity (ROP) or the retinal vein occlusion (RVO) are caused through a hypoxia induced upregulation of the vascular endothelial growth factor (VEGF). So far a correlation of intraocular VEGF concentrations to the impact of the pathologies is limited because of invasive sampling. Therefore, a minimally invasive, repeatable quantification of VEGF levels in the eye is needed to correlate the stage of VEGF induced pathologies as well as the efficacy of anti-VEGF treatment. Here we describe the development of three variants of enhanced BRET2 (eBRET2) based, single molecule biosensors by fusing a Renilla luciferase mutant with enhanced light output (RLuc8) to the N-terminus and a suitable eBRET2 acceptor fluorophore (GFP2) to the C-terminus of a VEGF binding domain, directly fused or separated with two different peptide linkers for the quantification of VEGF in vitro. The VEGF binding domain consists of a single chain variable fragment (scFv) based on ranibizumab in which the light- and the heavy- F(ab) chains were connected with a peptide linker to generate one open reading frame (orf). All three variants generate measureable eBRET2 ratios by transferring energy from the luciferase donor to the GFP2 acceptor, whereas only the directly fused and the proline variant permit VEGF quantification. The directly fused biosensor variant allows the quantification of VEGF with higher sensitivity, compared to the widely used ELISA systems and a wide dynamic quantification range in vitro. Our system demonstrates not only an additional in vitro application on VEGF quantification but also a promising step towards an applicable biosensor in an implantable device able to quantify VEGF reliably after implantation in vivo.